The shell is an industrial-grade tarpaulin of high tensile strength with PVC spread on both sides. There is no support frame, the tent is supported by overpressure produced by an air handling unit.
 Such
tent structures are an ideal option for indoor activities where a large and bright space with no columns is required instead of other covered halls.
Major advantages and features of inflated tents produced
by our company:
  heat
insulated shell structure
air
tight along fastening lines
made
of translucent tarpaulin
area
sizes from a few sq. m to 10,000 sq. m can be covered
erected
in a very short time
the
external surface is suitable to carry advertisement
TECHNICAL DESCRIPTION OF BUBBLES
FUNCTION:
extend the term of home pool usage in spring and autumn
PART OF TENT
 Waterbag:
650 gr/m² weight 0.55 mm thick technical canvas spread with PVC on both sides, lacquered, with poliester
filter inside, with filling/emtptying valves
Roof: 0.4 mm thick water clear PVC foil, expected lifetime is 6-8 years
Entrance: a horizontal and a vertical sewed zip, openable from outside and inside as well
Ventillator: power 220 V/130 W, built in a poliester house
Inflating valve: for the regulation of bubble tightness, depending on the quantity of water inside
OUTLOOK
Form and patterns of bubble planned with a computer programme, confection is made by high frequency welding machine.
BASE FORMS
Conditions of production:
Basic
area is bigger than 30m²
Min.
90° angles at the corners
Bubble
is simmetric at least for one axle
Paralell,
straight sides
Installation
is only possible on horizontal ground
For
extra price: higher side walls
Installation:
On a smooth , horizontal, ground, free from sharp objects and spots. Installation is possible with two persons, during 30 minutes. Take care that trees and bushes might injure the bubble. See more in installation and maintenance specification!
Cleaning, maintenance: Remove spots with warm, clear water, perhaps with a light, alkalescent solution. It is required to use special cleaning liquid once in a year. Long term storing is possibly when bubble is dry, folded, and on a place free from rodents.
Repair:
In case of demage, bubble must go down! Smaller injuries can repair with the enclosed repair set (glue, patch material), bigger demage must repair by producer!
|
